DO YOU NEED TO MAKE AN APPOINTMENT?

No appointment is necessary. We operate on a first-come, first-served basis for all gunsmithing services during regular store hours.
Store Hours:
Tuesday – Friday: 10:00 AM – 6:00 PM
Saturday: 10:00 AM – 5:00 PM
Please note that our busiest days are typically Tuesdays and Fridays. 
BUY WE BUY OR TRADE FIREARMS?
YES WE DO, AND WE ALSO OFFER CONSIGNMENT

 We specialize in firearm consignment and highly encourage this option for customers looking to maximize the value of their firearm.
How consignment works: We provide a detailed valuation breakdown
 Any firearm valued above $500 will be advertised on our GunBroker page at no additional charge
What increases your firearm’s value: Bringing in the following items can help increase the value and marketability of your firearm:
Original box
Extra magazines
Ammunition
Accessories (optics, grips, cases, etc.)
Consignment Terms: 20% consignment fee (deducted after the firearm sells)
90-day minimum consignment period
Need cash now? We understand that consignment isn’t right for every situation. Customers always have the option of a direct buy-out instead.
DO WE SHIP FIREARMS?
Shipping Fees:
$70 per handgun
$90 per long gun
Additional $50 surcharge for any firearm shipped to California
What we need at drop-off:
Recipient’s name, phone number, and FFL License for the receiving dealer or manufacturer
If the receiving FFL requires email verification, please provide a valid contact email so we can send the request
Important notes:
We DO NOT SHIP internationally
We DO NOT SHIP ammunition
DO WE OFFER CLEANING SERVICES?
Cleaning Service Options:
Light Cleaning — starting at $45
Includes a basic field strip and cleaning.
Standard Deep Clean — starting at $70
Includes full disassembly, followed by a thorough deep cleaning. Cosmoline and rust removal will add to the cost 
Deep Clean, Inspect & Test Fire — starting at $100
Includes the same full deep clean as above, plus an inspection and test fire to ensure the firearm is safe to shoot and functioning properly before return.
Severe Rust Removal — starting at $130
Recommended for firearms with heavy or severe rust buildup. Includes deep cleaning and rust removal. Final pricing depends on the extent of corrosion.

DO WE THEARD BARREL OF SUPPRESSORS?

Yes, we offer barrel threading services for suppressor use on eligible firearms.
Barrel Threading Requirements & Pricing:
Barrels shorter then 19 inches will have an added fee of $50
Standard barrel threading: $190
Cut, crown, and thread: $280 (if the barrel must be shortened before threading)
Common Thread Pitches Offered:
1/2×28 (most common for .223 / 5.56 and 9mm)
5/8×24 (most common for .30 caliber rifles)
9/16 x 24 & .578 x 28 (37/64x28)
Other thread pitches may be available upon inspection.
Important Notes:
WE DONT THREAD METRIC OR LEFT HAND
Not all barrels are suitable for threading; eligibility is determined after inspection
Thread pitch and shoulder dimensions will be verified to ensure proper suppressor alignment
All turnaround times listed are estimates only and may vary based on workload and firearm condition
DO WE INSTALL OPTICS?
Yes, we sell and install optics and offer multiple mounting options for both pistols and rifles.


Pistol Optics:
​
We typically stock Holosun and Trijicon RMR pistol optics
Please note: We do not keep mounting plates in stock due to variety of options
Mount & Boresight (7 yards): $60
Can be completed same day if parts are provided and are correct fit
(may very depending on work load)


Rifle Optics:

Scope mount & boresight (25 yards): $80
Service is typically completed in ~30 minutes, provided all parts are supplied
Estimated turnaround time: Same day when parts are available (estimate only)
(may very depending on work load)
Range Sighting Services:
Mount & sight-in at 100 yards: $140
Mount and sight-in at 200 yards: $190
Thermal optic mount & sight-in at 100 yards: $170

WHAT IS CERAKOTE?
Cerakote is a thin‑film ceramic coating specifically designed for firearms and other high‑wear equipment. It is applied as a liquid coating and then cured to create an extremely strong and durable, protective finish that bonds to the surface of the firearm.
Unlike traditional finishes, Cerakote is engineered to protect firearms from corrosion, wear, chemicals, heat, and harsh environmental conditions

Key Benefits of Cerakote Superior corrosion protection
Cerakote provides industry‑leading resistance to rust and corrosion, even in humid, wet, or salty environments. This makes it ideal for carry guns, duty firearms, hunting rifles, and firearms exposed to the elements.
Exceptional durability
The ceramic formulation creates a hard, abrasion‑resistant surface that stands up to holster wear, frequent handling, and repeated firing better than many traditional finishes.
Thin coating that preserves tolerances
Cerakote is applied in extremely thin layers, which means it does not interfere with tight tolerances or moving parts when applied correctly—something thicker coatings can struggle with.
Heat and chemical resistance
Cerakote withstands high operating temperatures and resists damage from solvents, cleaners, oils, and gun lubricants.
Customization and appearance
Cerakote offers a wide range of colors and finishes, allowing customers to restore worn firearms, modernize their look, or create custom builds while maintaining full functionality.

How Cerakote Compares to Other Common Firearm Finishes
Bluing
Bluing offers a classic appearance but provides minimal corrosion protection and requires frequent oiling and maintenance. Cerakote dramatically outperforms bluing in rust prevention and durability.
Parkerizing
Parkerizing improves corrosion resistance over bluing but still relies heavily on oil retention. Cerakote offers significantly greater longevity, color options, and wear resistance.
Anodizing (aluminum parts)
Anodizing is durable but limited to aluminum components and offers little flexibility in color matching or refinishing worn steel parts. Cerakote works on steel, aluminum, polymer, and more.
Nitride / Melonite
Nitriding provides excellent hardness and corrosion resistance but is limited to certain steel parts and offers no cosmetic customization. Cerakote adds both protection and customization, and can also be applied over nitrided surfaces for added benefits.
Powder Coating
Powder coating is thicker and can interfere with tolerances on firearm parts. Cerakote’s thin application makes it far more suitable for firearms and precision components.

Why Many Firearm Manufactures and Owners Choose Cerakote Extends the life of the firearm
Protects against rust and daily wear
Maintains proper function and tolerances
Allows for restoration or customization
Reduces maintenance compared to traditional finishes
Cerakote is widely used by military, law enforcement, manufacturers, and professional gunsmiths, making it one of the most trusted firearm coatings available today.

Here is a great YouTube Video for you to see for yourself the durability of Cerakote
​https://youtu.be/IL_bXx_qtfo
DO WE REMOVE BROKEN SCREWS?
Yes, we do remove broken screws.
Pricing:
$50 per screw for the first two screws
$30 per screw for each additional screw
If you have attempted removal yourself and are facing a broken a drill bit or extractor, don’t panic—we can remove those as well. In some cases, the screw hole may need to be drilled and re-tapped to a larger size, but this is a job we can confidently handle.
DO WE OFFER LAY-A-WAY?
Yes, we offer layaway on in-stock items only. A 50% down payment is required, and the remaining balance must be paid within 30 days.
Important Notes:
Layaway applies to IN-STOCK USED GUNS ONLY 
If the customer cancels the layaway or the 30-day payment period lapses, a 10% restocking fee will apply
WHAT ARE YOU TURN AROUND TIMES RIGHT NOW?
Our current estimated turnaround times are:
Small jobs: 1–2 weeks
Barrel threading: 2–3 weeks
Major jobs & Cerakoting: 3–4 weeks
We also offer a rush service that can often return most jobs in 1–2 weeks. Please ask our gunsmiths at the time of drop-off for an accurate quote with the rush fee included.
Important Note:
All turnaround times are estimates only and may vary based on workload and job complexity.
DO WE DO ENGRAVINGS?
Yes, we offer engraving services for a variety of firearm and NFA-related needs.
Engraving Services & Pricing:
ATF tax stamp engraving for SBR, SBS, and other NFA items — $50
Basic text engraving (names, numbers, quotes, team names, etc.) — $50
Logo engraving (must be compatible with our engraver) — $100 per logo
For examples of our work, please visit the Gunsmithing page on our website and view the Engraving tab for sample images and styles.